DavidsonFireAlarms.com Forums

by **1gunnjam1** » October 17th, 2009, 10:01 pm

Hi, I am getting a Fire Lite BG-12LX that is addressable and I have no controll box. If someone could post a video on YouTube or give clear instructions how to remove the addressable part of the pull station. That would be great.

Thanks
1gunnjam1
watch my YouTube videos

**Sponsor**

by **jpe** » October 17th, 2009, 10:14 pm

Surprisingly simple! Find the wires coming from the switch in the pull, cut them right before they enter the circuit board. You're done

Wohooo!

by **1gunnjam1** » October 17th, 2009, 10:32 pm

Thanks

http://www.youtube.com/user/jake479925 · by **Jake** » October 18th, 2009, 8:36 am

You are 100% incorrect in this instance JPE. Please do not give information you have not verified.

This is the rear of a BG-12LX on an addressable fire alarm system Please note this pull station is installed so it has wires that your new pull station will not have. First open the pull station and you will notice a white "module" with an LED on the front. Grasp that with two fingers and pull that straight out and throw it away.

Now, turn the pull station over. Notice the set of terminals with screws on the left with the red and black wires? That is the "module" side of the pull station. Now do you notice the two terminals to the right with no screws and two wires (green and white) soldered to them? You want to move the screws from the two terminals on the left to the two screw-less terminals on the right.

There are NO wires to move, and no wires to cut. Completing these two steps converts the pull station from addressable to conventional.

by **jpe** » October 18th, 2009, 11:16 am

Doh!

I was thinking of a simplex! I forgot the module was inside!

by **firealarms10** » March 9th, 2010, 7:38 pm

Can't help ya there.Sorry. :ymsigh:

by **Craig** » March 9th, 2010, 7:55 pm

firealarms10 wrote:Can't help ya there.Sorry.

Once again please do not bump 7 month old topics back to the top of the list. Thanks! :-BD

http://www.youtube.com/user/jake479925 · by **Jake** » March 9th, 2010, 7:56 pm

Firealarms10 first of all he has clearly already been helped.

Secondly please do not "bump" old topics when you have nothing usefull or productive to say.

DavidsonFireAlarms.com Forums

Modify Fire Lite BG-12LX

Modify Fire Lite BG-12LX

Modify Fire Lite BG-12LX

Re: Modify Fire Lite BG-12LX

Re: Modify Fire Lite BG-12LX

Re: Modify Fire Lite BG-12LX

Re: Modify Fire Lite BG-12LX

Re: Modify Fire Lite BG-12LX

Re: Modify Fire Lite BG-12LX

Re: Modify Fire Lite BG-12LX

Who is online